Congratulations on the acquisition of your NXG Truck Body. This manual outlines key responsibilities for safe operation, proper maintenance, and warranty compliance. NXG bodies are commercial-grade platforms engineered for demanding environments. Failure to follow these guidelines may lead to unsafe conditions and void your warranty.
NXG bodies are engineered for commercial, industrial, and fleet use. It is your responsibility as the owner to ensure:
Installation meets chassis OEM and FSM requirements
The body is used within rated capacity and legal limits
Loads are properly distributed and secured
Compliance with NHTSA and DOT standards is maintained
Deviation from these standards is at the user’s sole risk.
NXG strongly recommends installation by a certified upfit facility. The body must not be operated in conditions that exceed its design limitations. Improper installation or weight distribution may cause structural failure and void warranty coverage.
All NXG bodies come with warning and attention labels affixed to both interior and exterior surfaces. These must remain visible at all times. It is imperative that operators and personnel adhere to all posted instructions without exception.
Routine maintenance is essential for safe operation and longevity:
Inspect fasteners, bolts, and weld points monthly
Wash body and underside regularly—avoid abrasive chemicals
Pressure wash with caution to preserve the finish
Check and lubricate hinges, latches, and locks with white lithium grease
Apply marine grease to gooseneck and receiver balls when equipped
Inspect for rust or corrosion, especially in high-contact areas
Reapply protective coatings as needed
Improper cleaning may void warranty claims related to finish or corrosion.
Before operating, perform a visual inspection for loose components or wear.
Confirm all lighting and electrical function correctly
Never exceed the truck body’s load rating
Always secure cargo using appropriate tie-downs
Drive cautiously with heavy or uneven loads—avoid sudden stops or sharp turns
Your NXG Truck Body is backed by:
3-Year or 36,000-Mile Structural Warranty
2-Year Powder Coat Warranty
Make sure to register your product within 7 days at nextgentruckbodies.com/warranty.
What’s Not Covered:
Improper installation or misuse
Unauthorized modifications or repairs
Overloading or physical damage
Normal wear items like latches, lights, or seals
Corrosion caused by salt, chemicals, or poor maintenance
Have an issue? Call us within 30 days of noticing it. We’ll guide you through submitting a claim, including sending photos and proof of purchase.
If you have questions about installation, operation, or maintaining your NXG truck body, we're here to help.
